( مشاهده پاسخ شماره 1 تا 1 / از مجموع 1 پاسخ )

موضوع: Optimisation-based design method for membrane-assisted separation processes

  1. #1

    تاریخ عضویت
    Jul 2009
    رشته
    مهندسی شیمی
    نوشته ها
    514

    پیش فرض Optimisation-based design method for membrane-assisted separation processes

    ABSTRACT:
    ----------------------------------------
    This paper presents a design method for membrane-assisted separation processes based on the concept of process superstructure optimisation, which should be applied to the separation of azeotropic mixtures.
    The main features of the proposed method are as follows: (i) detailed rate-based modelling of all unit operations; (ii) experimental model identification for membrane separation; (iii) application of an evolutionary algorithm. This method allows the simultaneous determination of optimal process configuration, equipment design and operating conditions for membrane-assisted separation processes.
    A case study for the separation of a ternary mixture of acetone, isopropyl alcohol and water in a hybrid pervaporation-distillation process is presented using the optimisation-based design method. Detailed
    rate-based models for the unit operations involved were implemented in a generic process model and necessary membrane model parameters were determined experimentally in a laboratory-scale device
    for the hydrophilic polymeric membrane PervapTM 2201D from Sulzer Chemtech. After the identification of an appropriate process superstructure, the process configuration, dimensions of equipment and operating
    conditions required for the optimal hybrid pervaporation-distillation process were determined simultaneously. The optimisation criterion was the cost for purifying one ton of acetone. The results show that the developed method can be applied successfully for this complex mixed-integer non-linear
    optimisation problem.
    © 2012 Elsevier B.V. All rights reserved

    ABSTRACT INFO:
    ----------------------------------------
    Article history:
    Received 4 April 2012
    Received in revised form
    17 September 2012
    Accepted 18 September 2012
    Available online 13 October 2012


    KEYWORDS:
    ----------------------------------------
    Hybrid process
    Distillation
    Pervaporation
    Experimental membrane characterisation
    Rate-based modelling
    Evolutionary optimisation
    فايل هاي پيوست شده

اطلاعات موضوع

کاربرانی که در حال مشاهده این موضوع هستند

در حال حاضر 1 کاربر در حال مشاهده این موضوع است. (0 کاربران و 1 مهمان ها)

موضوعات مشابه

  1. Separation Technologies for the Industries of the Future
    توسط سعید رضازاده در انجمن کتاب های مهندسی شیمی
    پاسخ: 0
    آخرين نوشته: 10-18-2010, 10:49 AM
  2. On the Design of Chemical Processes With Improved Controllability Characteristics
    توسط سعید رضازاده در انجمن کتاب های مهندسی شیمی
    پاسخ: 0
    آخرين نوشته: 10-18-2010, 10:42 AM
  3. Handbook of Separation Process Technology
    توسط سعید رضازاده در انجمن کتاب های مهندسی شیمی
    پاسخ: 0
    آخرين نوشته: 10-18-2010, 10:39 AM
  4. Distillation Theory and Its Application to Optimal Design of Separation Units
    توسط saeedoo در انجمن کتاب های مهندسی شیمی
    پاسخ: 0
    آخرين نوشته: 11-07-2009, 10:10 PM
  5. فلرینگ Industrial Combustion Processes
    توسط محمد بهبهانی در انجمن مقالات مهندسی شیمی
    پاسخ: 0
    آخرين نوشته: 08-23-2009, 01:03 AM

کلمات کلیدی این موضوع

مجوز های ارسال و ویرایش

  • شما نمیتوانید موضوع جدیدی ارسال کنید
  • شما امکان ارسال پاسخ را ندارید
  • شما نمیتوانید فایل پیوست کنید.
  • شما نمیتوانید پست های خود را ویرایش کنید
  •